10
Filter replacement
Show data
Trend curve
1. Press “back” to return to the previous page.
2. Here you can set the amount of days between filter replacements.
3. Here you can reset the alarm for filter replacement.
4. Here you can turn off the ventilation unit before filter replacement and turn
the unit on again afterwards.
ATTENTION
Remember never to leave the unit off for a long period of time as con-
densate water may form in the unit and duct system and subsequently
cause damage.
You can read off current operational data for the ventilation unit. This will allow you
to check that the unit operates satisfactorily and to identify the cause of potential
alarms.
It is possible to see a Trend curve on various parameters - depending on
which ventilation unit you have.
To Next Page
Loading...
Need help?
General
