Niles DBI-1 User Manual

Niles Audio Corporation
www.nilesaudio.com
12331 S.W. 130 Street
Miami, Florida 33186
Tel: (305) 238-4373
Fax: (305) 238-0185
©2003 Niles Audio Corporation. All Rights Reserved. Niles, the Niles logo, IntelliPad, Blending High Fidelity and
Architecture are registered trademarks of Niles Audio Corporation. All other trademarks are the property of their
respective owners. Because we constantly strive to improve our products, Niles reserves the right to change
product specifications without notice. The technical and other information contained herein is not intended to
set forth all technical and other specifications of Niles products. Additional information can be obtained on-line
at www.nilesaudio.com or by calling Niles at 1-800-289-4434. Printed in USA. 11/03 DS00364A
Doorbell Interface
B
LENDING H IGH F IDELITY AND A RCHITECTURE
®
INSTALLATION & OPERATION GUIDE
DBI-1
DBI-1

Niles DBI-1 Specifications

General

Brand	Niles
Model	DBI-1
Category	Accessories
Language	English

Summary

Introduction

Features and Benefits

Parts Guide

Description

Operation Overview

Installation Considerations

Installation

Mounting the DBI-1

Details on how to physically mount the DBI-1 unit using screws or rubber feet.

Connecting the DBI-1

Steps for connecting the DBI-1 to the Niles MultiZone System and other components.

Installation Settings

Contact Closure and Voltage Triggers

Explanation of trigger inputs for independent chime control.

Chime and Audio Level Adjustments

How to adjust output levels for chimes and paging system audio.

Setting the Tone and Delay

Configuration of trigger tone and delay timing using DIP switches.

Recommended Tone/Delay Settings

Guidance on tone and delay settings for specific Niles MultiZone Systems.

Identifying MultiZone System Version

Instructions on how to determine the version of your Niles MultiZone System.

Chime Selection

Selecting desired chimes for front and rear doors using DIP switches.

Recording a Custom Chime

Process for recording a custom audio chime using the DBI-1.

Recording an Active Audio Signal

Steps to record an audio signal when audio is present.

Recording a Paused Audio Signal

Steps to record an audio signal from a paused state.

Specifications

Notes