Niles DBI-1 Installation Guide

PARTS GUIDE
The DBI-1 package includes the following parts:
• One (1) DBI-1 Doorbell Interface
• One (1) Set of Rubber Feet
• One (1) Universal Voltage Power Supply
• One (1) Installation Guide
After unpacking and before installation, the installer should carefully inspect the contents. If any
damage is discovered due to shipping, the installer should contact Niles Audio for assistance (see
back cover contact information).
OPERATION OVERVIEW
• The DBI-1 is operated by the door bell switches and automation systems that connect to
the contact closure and voltage trigger inputs. Triggers for two individual chimes (Chime
Selection 1 & Chime Selection 2) are provided for a front and rear door.
• Placing the DBI-1 into Lighted Doorbell Mode, the DBI-1 will provide the Voltage to il¬
luminate a single lighted doorbell button.
- 1 800 BUY HIFI - 1-305 238 4373
5
4
NILES AUDIO CORPORATION

Niles DBI-1 Specifications

General

Brand	Niles
Model	DBI-1
Category	Accessories
Language	English