General Information
8
Service Manual – SC400
– Use only brushes supplied with the machine or those specied in the User Manual. Using other
brushes could reduce safety.
– If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer.
– Do not wash the machine with direct or pressurised water jets, or with corrosive substances.
– The machine must be disposed of properly, because of the presence of toxic-harmful materials
(batteries, oils, etc.), which are subject to standards that require disposal in special centres (see
the User Manual).
– (For WET batteries only). When lead (WET) batteries are installed on the machine, do not tilt
the machine for more than 30° from the horizontal plane to prevent the highly corrosive acid
from leaking out of the batteries. If the machine must be tilted to perform any maintenance pro-
cedure, remove the batteries.
To Next Page
Loading...
Need help?
General
