Nilfisk-Advance Advolution 2710 - Introduction

Advolution 2710 Rider Burnisher How To
Store the Machine
1
Transport machine to
storage and charging
station.
2
Inspect burnishing pad.
3
Open seat
compartment, connect
the charger and wipe
down the exterior of the
machine.
Advolution 2710 Rider Burnisher How To
Daily & Occasional Maintenance
1
Charge batteries daily.
2
Check/Clean/Replace
Burnishing Pad.
3
Check/Clean/Replace
Dust Collection Bag.
4
Check Battery water
level(s).
Check/Replace Pad
Shroud Skirt.
5
Check steering chain
tension, lubricate
steering wheel shaft
universal joint
6
Check carbon brush
wear on pad, wheel
drive and actuator
motors.
* Should be performed
by an Authorized
Service Center
Monthly Maintenance
Yearly Maintenance
Weekly Maintenance