EasyManua.ls Logo

Nilfisk-Advance BR 1000 User Manual

Nilfisk-Advance BR 1000
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Nilfisk BR 1000
3/95 revised 7/00 Form Number 56041292
Model 56409629
Instructions for use
Bedienungsanleitung
Mode d' emploi
Gebruiksaanwijzing
English
Deutsch
Français
Nederlands

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance BR 1000 and is the answer not in the manual?

Nilfisk-Advance BR 1000 Specifications

General IconGeneral
Power sourceBattery
Battery voltage36 V
Solution tank capacity100 liters
Recovery tank capacity100 liters
Scrubbing width1000 mm
Machine typeWalk-behind scrubber
Working width1000 mm
Brush motor power1.1 kW
Vacuum motor power1.1 kW
Machine weight180 kg
Machine width1100 mm
Machine length1500 mm
Machine height1200 mm

Summary

Introduction and Initial Setup

Parts and Service Information

Info on obtaining parts and authorized service for repairs.

Machine Identification (Nameplate)

Location and importance of model/serial number for ordering parts.

Uncrating Instructions

Instructions for unpacking and inspecting the machine upon delivery.

Safety Precautions and Warnings

Symbols, Warnings, and General Safety

Explanation of symbols and general safety guidelines to prevent harm.

Battery Installation Procedure

Battery Safety Warnings

Caution about sulfuric acid and explosive hydrogen gas from batteries.

Servicing Battery Safety Precautions

Safety precautions for working on batteries.

Electrical Component Installation Caution

Warning about damage if batteries are not installed correctly.

Brush Installation

Initial Steps for Brush Installation

Safety checks and initial steps for brush installation.

Squeegee Installation

Initial Steps for Squeegee Installation

Initial steps for squeegee installation.

Solution Tank Filling

Determine Chemical Concentration for Tank

Instructions on determining chemical concentration for the solution tank.

Machine Operation Controls

Control Familiarization and Layout

Introduction to machine controls for safe and effective operation.

Scrubbing Operation

Floor Sweeping Before Scrubbing

Pre-scrubbing preparation step.

During Operation Procedures

Recommended Cleaning Pass Overlap

Recommended overlap for cleaning passes.

Advanced Cleaning Techniques

Double-Scrubbing Method for Difficult Floors

Method for cleaning difficult floors using two passes.

End of Operation Procedures

Monitoring Recovery Tank Status via Sound

Using motor sound to detect full recovery tank and take action.

Daily Maintenance: Power Down

Turn Off Switches and Key

Steps to power down the machine after use.

Daily Maintenance: Recovery Tank

Drain and Rinse Recovery Tank

Procedure for draining and rinsing the recovery tank.

Daily Maintenance: Squeegee

Rinse Squeegee with Clean Water

Cleaning the squeegee after use.

Daily Maintenance: Brushes

Rinse and Rotate Brushes for Longevity

Rinsing and rotating brushes for longevity.

Daily Maintenance: Machine Exterior

Wipe Machine Exterior with Damp Cloth

Cleaning the exterior of the machine.

Daily Maintenance: Battery Charging

Battery Charging Procedure and Warnings

Procedure for charging batteries and related cautions.

Comprehensive Maintenance Schedule

Daily Maintenance Tasks

List of daily tasks for machine upkeep.

Weekly Maintenance Tasks

List of weekly tasks for machine upkeep.

Monthly Maintenance Tasks

List of monthly tasks for machine upkeep.

Periodic Maintenance Tasks (Six-Month/Annual)

Six-month and annual tasks for machine upkeep.

Battery Water Level Check

Weekly Check and Fill Procedure

Weekly check and fill of battery cells with distilled water.

Battery Overfilling Warning

Warning about overfilling batteries and potential acid spills.

Solution Tank Maintenance

Drain and Rinse Solution Tank System

Steps to clean the solution system and tank.

Troubleshooting Circuit Breakers

Circuit Breaker Identification and Reset

Identification and reset procedure for circuit breakers.

Technical Specifications Overview

Model and Performance Data

Key specifications like model number, performance, and weight.

Vibration and Noise Data

Vibration levels and sound power level.

Related product manuals