EasyManuals Logo

Nilfisk-Advance SC800 How-To

Nilfisk-Advance SC800
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SC750/SC800 How To
Prepare for use
1
This is how the
machine should look
when you enter the
room.
2
Unplug battery charger.
Wrap cord accordingly.
3
Inspect recovery tank
and ball float cage then
lower the lid.
4
Fill solution tank with
water (do not exceed
130
°
F). Add appropriate
cleaning chemical.
5
Do not mix detergent in
the tank for EcoFlex
models (fill cartridge).
6
Inspect squeegee
blade, install squeegee
on machine
(attach
recovery hose to the squeegee
inlet).
7
Inspect and install
brush or pad.
8
Install brush or pad-
holder under the deck.
9
Install brush for
(
Cylindrical models
).
10
Safely transport
machine to desired
work location.
11
Turn on machine. Verify
there is enough battery
life to complete job.
Choose appropriate
controls for the job.
12
Turn on scrub switch,
lower squeegee and
begin scrubbing.

Other manuals for Nilfisk-Advance SC800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance SC800 and is the answer not in the manual?

Nilfisk-Advance SC800 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelSC800
CategoryScrubber
LanguageEnglish

Related product manuals