10 - FORM NO. 56041342 / SHADOW
™
17/20
AFTER USE
1 Unplug the Power Cord, coil it and hang it from the Operator Handle Grips.
2 Remove the pad holder or brush from the machine. Clean the pad or brush and hang it up to dry. Allow buffing pads
to dry completely before using again.
Store brushes and pad holders separate from the machine.
Never store the machine with the pad holder or brush on
the machine.
3 Wipe the entire machine with a clean, damp cloth. Wipe the underside of the brush housing after wet use.
4 Inspect the entire machine and all accessories for damage. Perform any required maintenance or repairs before
storage.
5 Store the machine in a clean, dry place with the Handle locked in the upright position.
To Next Page
Loading...
