16
16
Nilfisk
ALTO
E
Trouble shooting
Removing/fitting belt (all models)
1. Take the cleaner head
with the adapter ring off
the container, and lift the
container out of the base
frame.
2. Mark the position of the
belt on the container (1).
3. Remove the ring (8) on the coupling
Take out the coupling.
4. Thread a normal length
of cord (3) or the like (60-
80 cm) through one of the
Loops (4) of the tensioning
device, and pull the loop
(4) back over the catch
(6). Detach the second
loop (4) in the same way,
and take off the belt (7).
5. Fit in the reverse order,
making sure the belt (7) is
correctly positioned.
7
3
4
6
4
4 6
6
1
8
To Next Page
Loading...
Need help?
General
