Nilfisk-ALTO ATTIX BASIC - Motor not working with switch set to 1

14
14
Nilfisk
ALTO
E
Trouble shooting
Check:
- Mains voltage present ?.
- Power cord plugged in ?.
- Switch set to 1 ?.
Power at the motor ?.
Power at the switch.
Check mains plug and
power cord,
replace if necessary
Power at start unit ?.
Check switch,
replace if necessary.
Replace start up unit
Check safety requirements
Motor working ?.
Check motor,
replace is necessary.
Yes
Yes
Yes
Yes
No
No
No
No
Motor not working with switch set to 1.