Nilfisk-ALTO ATTIX BASIC - Motor not working with switch set to Auto

15
15
Nilfisk
ALTO
E
Trouble shooting
Check:
- Mains voltage present ?.
- Power cord plugged in ?.
- Switch set to Auto?.
- Switched-on load with at least 60W plugged into socket.
Power at the motor ?.
Power at the switch.
Check mains plug and
power cord,
replace if necessary.
Power at start –up unit and
socket
Check switch,
replace if necessary.
Replace start -up unit
Check safety requirements
Motor working ?. Check motor,
replace is necessary.
Yes
Yes
Yes
Yes
No
No
No
No
Motor is not working with switch set to Auto.