8
EVO 360 SETTINGS
To set video camera parameters, hold down key for several seconds and navigate the menu
that appears with the same key , then confirm selections by pressing key .
To return to the previous level, hold down key for several seconds.
Video settings appear in video mode while, vice versa, camera menus appear in camera mode.
Some settings are shared by both modes.
Only the settings for the current mode are displayed the first time you press the key , shared
settings are displayed if you press the key.
SETTING SHARED PARAMETERS
From any mode.
Hold down key for several seconds and then press key .
POWER SAVE
This sets when EVO 360 turns off to save the batteries.
Go to:
Power save
Press key to confirm
Select with and confirm with
The choices for the video resolution are the following:
• 1 min, 3 min, 5 min, Off
DATE AND TIME
This sets the data and time that will appear on pictures and videos.
Go to:
Date and time
Press key to confirm
Switch from one field to the next with key , edit fields with key and confirm with key
.
DISPLAY DATE
Once the date and time are set, you can display them on pictures and videos.
Go to:
Display date
Press key to confirm
To Next Page
Loading...
