Nilox EVO 4KS+ - Detailed Camera Settings and Functions; Recording Time Estimation and White Balance; White Balance Adjustment Options; Additional Settings and Media Viewing

17
REMAINING VIDEO RECORDING SHOTS
Signals the time remaining on the microSD card if recording videos and the number of shots if, vice
versa, in photo mode.
This obviously depends on the memory card and type of resolution used.
WHITE BALANCE
This lets you achieve higher brightness and colour saturation depending on the light conditions.
Possible choices are:
• Automatic.
• Daylight.
• Cloudy.
• Fluor.
• Tungsten (internal traditional incandescent bulb).
PARAMETERS SETTING
This lets you set a series of additional parameters on your EVO 4KS+.
FREQUENCY:
Lets you define the transmission frequency to an external device.
Possible choices are:
• 50 HZ, 60 HZ
UPSIDE-DOWN:
Lets you invert the video and photo view on the cam.
This function is especially helpful if you hand the cam upside-down (as, for example, a Dash-cam in
a car)
Possible choices are:
• On, Off
VIEW PHOTOS AND VIDEOS
Lets you see the photos and videos saved on the cam memory.
Details of this function will follow below.
SHOOT BUTTON
Lets you take videos and photos; pressing the same button again stops video recording.
CURRENT MODE AND STATUS SWITCH
Displays whether the cam is running in video or photo mode. Press the icon to switch the cam from
one mode to another. The displayed icon consequently changes.