Nilox EVO 4KS+ - Advanced Capture Modes; Burst and Time-Lapse Capture Modes; Time-Lapse Video Creation

8
BURST MODE
Lets you take 3 photos in sequence every time the shutter button is pressed.
Enable this mode by pressing the key in photo mode.
These are the indications that appear on the cam display
The resolution parameters are set in the settings menu
1. Battery charge level.
2. Photo resolution.
3. Current mode.
4. Shots taken.
5. Remaining photos (*).
(*) With reference to the set resolution
TIME-LAPSE MODE
Lets you take a series of shots with settable time sequence.
These shots will make up a video.
To correctly set time-lapse mode, following the instructions in the parameter setting menu.
1. Battery charge level.
2. Photo resolution.
3. Current mode.
4. Shots taken.
5. Remaining photos (*).
(*) With reference to the set resolution