NIMO FT 120 VP - Parameter List; Adjustments

6.4.2 Parameter list
Parameter Name Value Meaning
P105 Language 0
1
2
3
4
5
6
7
English
Swedish
Norwegian
Danish
Finnish
-
French
German
P115 Child lock On/O 0
1
O
On
P150 Test programme 11 Test running the dierent parts of the heat pump
P2131 Extra 15 min Time of the drying process after the relative moisture
level has been reached
P2132 Normal 25 ReH Relative moisture level for the moisture sensor
P2133 Max time 240 min Max time of the drying process
P2134 Cool 5 min Time the fan runs after drying has nished
If the laundry is not dry enough for:
Normal dryness reduce the value of parameter
P2132 (moisture sensor)
Extra dryness increase the value of parameter
P2131 (time constant)
If the laundry is too dry, long drying time, for:
Normal dryness increase the value of parameter
P2132 (moisture sensor)
Extra dryness reduce the value of parameter
P2131 (time constant)
The optimization of drying processes should always be
done in small steps, start by adjusting the current para-
meter 1-2 units up or down. Then check to see the result
after the next drying process and make any additional
adjustments, if needed.
6.4.3 Adjustments
The programme Normal dryness is controlled by a moisture sensor.
The programme Extra dryness is controlled by a time sensor after the relative moisture level has been reached.
The automatic programmes stop automatically when the relevant values are reached.
ENGLISH 31