4 Press the START/STOP button to begin. The unit does not need to preheat.
NOTE: During dehydration, you can open the lid to check on your food. The timer will pause when the lid is opened
and then automatically resume after it is closed.
5 When dehydration time is complete, the unit will beep and END will appear on the display screen. Remove your
food and close the lid.
CLEANING YOUR GRILL
The unit should be cleaned thoroughly after every use. Always let the appliance cool before cleaning.
Unplug the unit from the wall socket before cleaning. Keep the lid open after removing your food so the unit will
cool down more quickly.
To clean the main unit and control panel, wipe them with a damp cloth.
The cooking pot, grill plate, crisper basket, splatter guard, cleaning brush and any other additional Ninja grill
accessories are dishwasher safe.
NOTE: NEVER use abrasive tools or cleaners. NEVER immerse the main unit in water or any other liquid.
If hand-washing, use the cleaning brush to help wash the parts. Use the opposite end of the cleaning brush as a
scraper to assist with releasing baked-on foods. Air-dry or towel-dry all parts after handwashing.
If food residue or grease are stuck on the grill plate, splatter guard, or any other removable part, place them in a
sink or stack them in the pot and fill with warm, soapy water and allow to soak for a couple hours or overnight.
After soaking, use the cleaning brush to clean each part.
Over time, the splatter guard front tabs and frame may accumulate grease. Soaking the splatter guard overnight
will help soften the baked-on grease. After soaking, use the cleaning brush to remove the grease from the
stainless steel frame and front tabs.
TROUBLESHOOTING GUIDE
“Add Food” appears on the control panel display.
The unit has completed its Grill preheating and it is now time to add your ingredients.
“Shut Lid” appears on the control panel display.
The lid is open and needs to be closed for the selected function to start.
“Add Pot” appears on the control panel display.
The pot is not installed in the unit.
“E” appears on the control panel display .
The unit is not functioning properly. Please contact Customer Service at 0800 862 0453.
Why do blinking lights appear after I press the START/STOP button?
This is a progress bar indicating how far along you are in the preheating cycle.
Why does the preheat progress bar not start from the beginning?
When the unit is warm from previously being used, it will not require the full preheating time.
Should I add my ingredients before or after preheating?
Let the unit preheat before adding ingredients.
To Next Page
Loading...
Need help?
General
