To Next Page
J
Jennifer HerreraAug 12, 2025
What to do if the Ninja BL200 motor doesn’t start?
- JjacksonmatthewAug 12, 2025
If the motor of your Ninja Blender doesn’t start or the attachment doesn’t rotate, try the following: * Ensure the container (bowl or pitcher) is securely aligned and locked on the motor base. * For the single serve cup, ensure the tabs are seated in the slots and turned to the left. * Make sure the lid is securely on the bowl or the pitcher in the correct position with the arrows aligned. * Check that the plug is securely inserted into the electrical outlet. * Check the fuse or circuit breaker in your electrical box. * The unit could be overloaded. Unplug and wait approximately 30 minutes before using again. * The unit could be overheated. Unplug the unit and wait 30 minutes to reset.
General
