2
www.ninjakitchen.com
20 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
21 DO NOT expose containers to extreme
temperaturechanges.
22 DO NOT overfill.
23 DO NOT operate the appliance empty.
24 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
25 If the appliance overheats, a thermal switch
will become activated and shut off the motor.
To reset, unplug the appliance and let it cool
down for approximately 30 minutes before
using again.
26 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
SAVE THESE
INSTRUCTIONS
9 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
EURO-PRO Operating LLC for examination,
repair or adjustment.
10 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
11 Always use appliance on a dry, level surface.
12 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce
the risk of severe injury to persons or damage
to the appliance. A scraper may be used but
only when the appliance is not running.
13 Avoid contact with moving parts.
14 DO NOT attempt to sharpen blades.
15 DO NOT use the appliance if blade assembly
is bent or damaged.
16 To reduce risk of injury, never place the blade
assembly on base without pitcher or bowl
properly attached.
17 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
18 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
19 DO NOT remove the container from the motor
base while the appliance is in operation.