Ninja BL680A User Manual

11
1-877-646-5288
Assembly and Use for the Processor Bowl - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
USING THE CHOPPING BLADE ASSEMBLY
1 Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and press
on the power button (
). Select the speed or Auto-iQ
™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ
™
Pulse
button until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
4 When you have reached your desired consistency, stop
the appliance by pressing the power button (
) and
wait for the blade to stop turning. (Fig. 2)
5 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
7 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE
1 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 5)
2 Add the ingredients and secure the bowl lid onto the bowl.
3 Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
4 Once finished making dough, stop the appliance by
pressing the power button (
) and wait for the blade to
stop turning.
5 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
7 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
REMOVAL
Fig. 2 Fig. 3 Fig. 4
USE
Fig. 5
USE
Fig. 1

Ninja BL680A Specifications

General

Brand	Ninja
Model	BL680A
Category	Blender
Language	English