10
www.ninjakitchen.com
USING THE DOUGH PADDLE
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig. 12)
2 Secure the bowl onto the motor base.
3 Holding the dough paddle by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight.
4 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 12)
NOTE: Forbestresultsaddwetingredientsrstand
then add dry ingredients.
5 Plug the power cord into the electrical outlet and press
on the power button (
).
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses.
REMOVAL
1 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle.
2 Turn the bowl counter-clockwise and lift it to remove it
from the motor base.
3 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 13)
Fig. 12
Fig. 13
To Next Page
Loading...
