11
1-877-646-5288
HOW TO STORE
1 Store the Ninja
®
Kitchen System 1200
™
upright with
the pitcher on the motor base, 6-Blade assembly inside
the pitcher and lid on the pitcher. Do not place anything
on top. Store the bowl with the 4-Blade assembly inside
and the lid on top. Keep the bowl and the rest of the
attachments along side the appliance where it will not
be damaged and won’t cause hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Kitchen System 1200
™
features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher and bowl in the dishwasher. Place the
lids and attachments on the top rack. Use caution when
handling the blade assemblies as the blades are very
sharp.
OR
4 Carefully hand wash the lids, pitcher, bowl, blade
assemblies in warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
Care & Maintenance
To Next Page
Loading...
