25
ninjakitchen.co.uk
24
ninjakitchen.co.uk
“ADD POT” error message appears on display screen.
• Cooking pot is not inside the cooker base. Cooking pot is required for all functions.
“SHUT LID” error message appears on display screen.
• The lid is open and needs to be closed for the selected function to start.
“ADD WATER” error message appears on display screen when using the Steam and
Pressure function.
• The water level is too low. Add more water to the unit for the function to continue.
“PRESSURE FAIL” error message appears on display screen when using the Pressure function.
• Add more liquid to the cooking pot before restarting the pressure cook cycle.
• Make sure the pressure release valve is in the SEAL position.
• Make sure the silicone ring is installed correctly.
“ERR” message appears.
• The unit is not functioning properly. Please contact Customer Service at 0800 862 0453.
“SLIDE” error message appears on display screen.
• Move the slider to the position desired before selecting a cooking function.
“LOCK LID” error message appears on display screen.
• Move the slider to the PRESSURE position in order to lock the lid.
1 For consistent browning, make sure ingredients are arranged in an even layer on the
bottom of the cooking pot with no overlapping. If ingredients are overlapping, make sure
to shake halfway through the set cook time.
2 For smaller ingredients that could fall through the reversible rack, we recommend first
wrapping them in a parchment paper or foil pouch.
3 Use the KEEP WARM mode to keep food at a warm, food-safe temperature after cooking.
To prevent food from drying out, we recommend keeping the lid closed and using this
function just before serving.
4 To reheat food, use the AIR FRY function.
HELPFUL TIPS
TROUBLESHOOTING GUIDE - CONT.
NOTES
To Previous Page
Loading...
Need help?
General
