Do not go past the MAX LIQUID line when
loading the cup. Overfilling ingredients
may harm the FreshVac Pump when in
use. If you feel resistance when attaching
the Pro Extractor Blades® Assembly to the
cup, remove some ingredients.
CAUTION: Remove the Pro Extractor Blades Assembly from the Single-Serve FreshVac Cup upon completion of blending.
Do not store ingredients before or after blending in the cup with the blade assembly attached. Some foods may contain
active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup
that can pose a risk of injury. For ingredient storage in the cup, only use Spout Lid to cover.
Top o with ice or frozen ingredients.
Next add any dry or sticky ingredients
like seeds, powders, and nut butters.
Pour in liquid or yogurt next.
For thinner results or a juice-like
drink, add more liquid as desired.
Next add leafy greens and herbs.
Start by adding fresh fruits and vegetables.
PREP TIPS
For best results, cut ingredients in
1-inch chunks. Place frozen ingredients
in the cup last.
5
4
3
2
1
LOADING TIPS FOR YOUR
SINGLE-SERVE FRESHVAC™ CUP
LOADING TIPS
TIPS FOR YOUR FRESHVAC
™
PITCHER
Do not go past the MAX LIQUID line when
loading the cup. Overfilling ingredients may
harm the FreshVac Pump when in use. Load
softer, water-dense ingredients on the bottom,
and ice or frozen ingredients on top. This will
create a vortex in the pitcher that makes for a
smooth breakdown of ingredients.
LOADING TIPS
Start by adding fresh fruits and vegetables.
Top o with ice or frozen ingredients.
Next add any dry or sticky ingredients like
seeds, powders, and nut butters.
Pour in liquid or yogurt next. For thinner results
or a juice-like drink, add more liquid.
Next add leafy greens and herbs.
5
4
3
2
1
PREP TIPS
For best results, cut ingredients in 1-inch
chunks. Do not place frozen ingredients
first in the pitcher.
To Next Page
Loading...
Need help?
General