TOLL FREE: 1-877-646-5288
10
Using the Master Prep
®
Professional Bowl
Shaft
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
1 Place the Master Prep
®
Professional bowl on a
clean, dry, level surface.
2 Holding the lower blade by the shaft, place it over
the spindle pin inside the Master Prep
®
Professional
bowl. (fig. 1)
3 Carefully insert the upper blade over the lower
blade rotating it until it locks onto the lower blade.
(fig. 2)
IMPORTANT: Always assemble the blades inside
the container.
WARNING: DO NOT try to place the blades onto
the power head and then into the Master Prep
®
Professional bowl.
4 Place the food that you want to process into the
Master Prep
®
Professional bowl.
IMPORTANT: Never add ingredients into the
Master Prep
®
Professional bowl before placing the
blade assembly in first.
NOTE: DO NOT add more than 2 cups dry or 1 cup
liquid ingredients as this will strain the motor and
may cause overflow.
2
1
To Next Page
Loading...
