Ninja QB1004 series - Using the Master Prep Professional Pitchers; Pitcher Blade Assembly; Pitcher Usage Warnings

TOLL FREE: 1-877-646-5288
8
WARNING: DO NOT try to place the blade onto
the power head and then into the Master Prep
®
Professional Pitcher.
Using the Master Prep
®
Professional Pitchers
3
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
1 Place the Master Prep
®
Professional Pitcher on a
clean, dry, level surface.
2 Holding the blade by the shaft, place it onto the
spindle pin inside the Master Prep® Professional
Pitcher.
• Use the Ninja
®
6-Blade in the 48 oz. Pitcher. (fig. 1)
• Use the Ninja
®
4-Blade in the 40 oz. Pitcher. (fig. 2)
IMPORTANT: Place blade inside the container
carefully as blades are sharp.
1
2
Shaft
Shaft