Nintendo DSI - Replacing the Battery Pak; Battery Disposal Guidelines

Replacing the Nintendo DSi XL
J Rechargeable Battery Pak
If it becomes necessary to replace the Battery Pak, follow this procedure. Replacement
Battery Paks are sold separately. Please contact your Nintendo Service Centre for
further information on where to purchase a replacement. If you do not want to replace
the Battery Pak on your own, you may send your Nintendo DSi XL system to the Nintendo
Service Centre to have the Battery Pak exchanged by an authorised technician.
A parent or guardian should replace the Battery Pak
if a young child is using the system.
(1) Always turn the power off and disconnect the Power Supply before replacing
the Battery Pak.
@ Using a screwdriver, loosen the screws on the
battery cover. Remove the battery cover and retain.
Always use an appropriate screwdriver for the screw.
Using the wrong screwdriver may damage the head
of the screw and you will not be able to remove the
battery cover.
© insert a new Battery Pak into the Nintendo DSi XL.
Use only a new Nintendo DSi XL Battery Pak (UTL-003),
which is a lithium-ion battery designed only for use
with the Nintendo DSi XL system (UTL-001(EUR)).
Make sure to insert the new Battery Pak
correctly, as shown in the illustration.
(5)
Replace
the
ba
carefully
ti
Disposal
* Discarding batteries in your general household waste can be harmful to the
environment. When disposing of the Battery Pak, follow appropriate local
guidelines and regulations.
* In accordance with the Directive on Batteries and Accumulators and Waste Batteries
and Accumulators (2006/66/EC), battery collection and recycling schemes should
be in place in all EU Member States since 26 September 2008. If these schemes are
available in your country, the Battery Pak should not be disposed of in your general
household waste. For further information contact your local solid waste authority.
a