NIPRO Diagnostics True2go - Page 33

31
Messages
Display
Reason
Temperature
Error
•
Too Cold/
Too Hot
Sample Not
Detected or
Using Wrong
Test Strip
Used Strip,
Test Strip Outside
of Vial too Long,
Sample on Top of
Strip
Meter
Error
Test Strip
Error
Action
Move Meter and Strips
to area between
50-104ºF; wait 10 minutes
for System to reach room
temperature
before testing.
Retest with new or
correct Strip and
larger sample.
Repeat with new Strip.
Make sure sample is
touched to edge of Strip
(not top). If error persists,
call for assistance.
Call for
assistance.
Retest with new Strip.
If error persists,
call for assistance.
T2g_OB_GutsENG_F4NPD04r21.indd 31 12/21/11 9:56 AM