NIPRO Diagnostics True2go - System Components and Setup; General Important Information

IMPORTANT INFORMATION:
For the most accurate results using TRUE2go:
• Read all instructions before testing.
• TRUE2go is an in vitro (outside body) quantitative
system that is used for self-testing and point-of-
care testing of human whole blood only.
• Meterdisplaysresultsasplasma values.
• Use only TRUEtest™ Test Strips and TRUEtest Glucose
Control with TRUE2go Meter.
• Donotusefordiagnosisofdiabetesorfor
testing blood glucose in newborns.
• PerformControlTestsbefore performing a blood
glucose test for the first time
(see Getting Started).
Note: Three levels of TRUEtest Glucose Control Solution
are available for Quality Control Testing. It is
important to perform Control Tests with more than
one level of Control to assure your System is working
properly and your testing technique is good. Contact
place of purchase or call for assistance to obtain
Control.
• WhencarryingyourTRUE2goSystemwithyou,
do not leave it where the storage temperature
printed on vial label may be exceeded (car, trunk,
briefcase, etc).
• RemoveonlyoneStripatatimefromvialwhen
testing. Recap vial immediately after removing
Strip.
7
T2g_OB_GutsENG_F4NPD04r21.indd 7 12/21/11 9:56 AM