Need help?Do you have a question about the NIPRO Diagnostics TRUEresult and is the answer not in the manual?
General| Measurement Range | 20-600 mg/dL |
|---|---|
| Display | LCD |
| Hematocrit Range | 30-55% |
| Memory Capacity | 500 results |
| Battery Life | Approximately 1000 tests |
| Weight | 1.7 oz (48 g) with battery |
| Operating Temperature | 10-40°C (50-104°F) |
| Operating Humidity | 10 to 90% RH |
| Sample Size | 0.5 µL |
| Battery Type | One 3.0V CR2032 lithium battery |
| Storage Conditions | 39° to 86°F (4° to 30°C) |
Explains the two basic steps for using the meter.
Lists critical safety precautions like not reusing test strips or sharing the meter.
Advises on proper cleaning and hand hygiene to prevent infection risk.
Lists specific treatments that may cause false high glucose results.
Describes symptoms of low and high blood glucose levels.
Lists specific medical treatments that interfere with accurate glucose measurement.
Provides tips for accurate results, including reading instructions and using correct supplies.
Illustrates and describes the correct method for applying a blood or control sample.
Explains the auto self-test and indicators of proper meter function.
Covers adjusting supplies, checking dates, mixing control, and inserting the strip.
Covers waiting for the drop symbol, applying the sample, and meter progress.
Explains comparing control results to range and proper strip disposal.
Details how to apply the control sample to the test strip correctly.
Emphasizes safety precautions for the lancing device, including single-use.
Provides step-by-step instructions for collecting a blood sample from the fingertip.
Covers checking test strip expiration dates and preparing the sample.
Details applying the blood sample and the test completion process.
Explains inserting the test strip and waiting for the drop symbol.
Describes how the meter indicates results below 20 mg/dL or above 600 mg/dL.
Lists reasons and actions for when the meter fails to turn on.
Provides troubleshooting steps for when the meter does not beep or start testing.
To Next Page
