Getting Started
e Meter turns on when a Test Strip is inserted into
the Test Port or when “ S ” Button is pressed (see
Memory and Meter Set Up). Meter turns o when the
Strip is released from the Meter or aer 2 minutes of
non-use.
Meter comes with pre-set time, date and all testing
Alerts and Reminders o. Before using the Meter
for the first time or aer a battery change, check
the time, date, Alerts and Reminders, and update as
needed (see Meter Set Up).
15
Tre_OB_GutsENG_E4NPD04r22.indd 15 4/24/12 9:53 AM
To Next Page
Loading...
