NIPRO Diagnostics TRUEresult - Using the Test Strip; Test Strip Contact and Sample Tip; Correct Sample Placement

12
① Contact End - Insert into Test Port with blocks
(contacts) facing up .
② Sample Tip - Bring sample (fresh, capillary or
venous blood or Glucose Control) to edge of Tip.
Note: Insert Strip into Meter before touching
Sample Tip to blood or Control drop.
Sample Placement
Correct Placement Incorrect Placement
• Allow sample (blood or Glucose Control drop)
to be drawn into Sample Tip until testing begins
(Meter beeps and dashes move across Display) .
Caution! Holding the Test Strip Sample Tip to the
blood sample too long aer the Meter
begins testing may cause inaccurate results.
• Do not smear or scrape drop with Strip.
• Do not apply more sample to the Strip aer
testing begins.
Note: Do not apply blood or Glucose Control to top
of Test Strip.
Do not insert Sample Tip with sample into
Meter for testing. May damage Meter.
Test Strip
12
Top of Test Strip
Tre_OB_GutsENG_E4NPD04r22.indd 12 4/24/12 9:53 AM