Nitecore TIP2 User Manual

Contents [ hide
1 Charging Instructions
2 Features
3 Specifications
4 Accessories
5 Technical Data
6 Warranty Service
7 Charging Function
8 Operating Instructions
9 User Modes
10 Mode Switching
11 ATR (Advanced Temperature Regulation)
12 Power Indication
13 File Downloads
14 References
15 Related Manuals
Charging Instructions
Q&A
Q: Why does my TIP2 shut down in 30 seconds?
A: TIP2 has 2 user modes, DEMO Mode and DAILY Mode. The default setting is DEMO Mode where the product will automatically shut down
if there is no operation in 30 seconds. It is recommended to switch it to DAILY Mode when in daily use.
Please follow the steps below for mode switching:
1. When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode.
2. The LED will flash to indicate the current user mode: 1 flash to indicate DEMO Mode and 2 flashes to indicate DAILY Mode.
Features
Utilizes 2 x CREE XP-G3 S3 LEDs with a max output of 720 lumens
Max beam intensity of 2,160cd and max throw distance of 93 meters
Lightweight and rigid CNC machined body
Utilizes a total reflective optic lens for uniform and soft light · Built-in 500mAh Li-ion battery
Built-in Li-ion battery charging circuit with a Micro-USB port
Advanced Power Cut-Off (APC) technology for an ultra-low parasitic drain
High-efficiency constant circuit provides stable output up to 55 hours
2 user modes available (DEMO Mode and DAILY Mode)
Dual side switch design
4 brightness levels available with direct access to TURBO
Intelligent mode memory function

Nitecore TIP2 Specifications

General

Product color	Black
Flashlight type	Hand flashlight
Housing material	-
Waterproof	No
Battery life (max)	55 h
Rechargeable battery	Yes
Quantity per pack	1 pc(s)
Lamp type	LED
Lamps quantity	1 lamp(s)
Light output (max)	720 lm
Luminous intensity	2160 cd
Light beam distance (max)	93 m

Weight and Dimensions

Width	62.6 mm
Weight	38.3 g
Head diameter	26.9 mm