TIP2 has 2 user modes, DEMO Mode and DAILY Mode.
DEMO Mode: The light will automatically shut down if there is no operation in 30 seconds.
DAILY Mode: The light will not automatically shut down and will need to be shut down manually.
Note: The default setting is DEMO Mode. It is recommended to switch it to DAILY Mode when in daily use.
Mode Switching
When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode.
The light will flash to indicate the current user mode: 1 flash to indicate DEMO Mode and 2 flashes to indicate DAILY Mode.
Note: Reactivating the light within 3 seconds after it automatically shuts down in DEMO mode will temporarily access DAILY Mode until it is
turned off.
Brightness Levels
When the light is on, short press the Mode Button to cycle through “LOW MID – HIGH”. (TIP2 has mode memory. When reactivated, the
flashlight will automatically access the previous memorized brightness level.)
Direct Access to TURBO
When the light is on/off, press and hold the Mode Button to access TURBO. Release to return to previous status.
ATR (Advanced Temperature Regulation)
The integrated ATR technology regulates the output of TIP2 according to the working condition and ambient environment to maintain the
optimal performance.
Power Indication
When the light is off, short press the Mode Button and the power indicator will flash to indicate the remaining power of the batteries: 1. Flashing
three times indicates that the power is above 50%; 2. Flashing twice indicates that the power is below 50%; 3. Flashing once indicates that the
power is below 10%.
Cautions
1. The TURBO Brightness Level of 720 lumens will produce massive heat rapidly during long-time activation. Use caution when operating the
light in TURBO mode to avoid overheating and step down to a lower level if the light becomes too hot to handle.
2. The product contains strong magnetic components. DO NOT put it close to objects that tend to suffer from magnetic interference.
3. CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
4. Please charge the battery before the first use.
5. Please recharge the product every 3 months when left unused for a prolonged time.
6. The product contains small assembly parts. Please keep it away from children to avoid danger of choking or suffocation.
7. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou,510623, Guangdong, China
Thanks for purchasing NITECORE! Please find us on Facebook : NITECORE Flashlight
Made in China TIP1003220
File Downloads
User Manual
Dual Core Magnetic Keychain Light, TIP2
Download [optimized]
Download
References
NITECORE
NITECORE
NITECORE
NITECORE® Trademark
To Next Page
Need help?
General
Weight and Dimensions
