Nitecore TUP User Manual

Warranty Service
All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of
charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
1. he product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use. For the latest information on NITECORE® products and services, please
contact a local NITECORE® distributor or send an email to service@nitecore.com All images, texts and statements specified
herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information
specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this
document at any time without prior notice.
Features
Revolutionary Intelligent Pocket Light
Utilizes a CREE XP-L HD V6 LED with a max output of 1,000 lumens
Max beam intensity of 8,130cd and max throw distance of 180 meters
Utilizes a total reflective optic lens for uniform and soft light
Multifunctional OLED real-time display for lumens, battery voltage and runtime etc.
Built-in 1,200mAh Li-ion battery
Advanced Power Cut-Off (APC) technology for an ultra-low parasitic drain
Built-in Li-ion battery charging circuit with a Micro-USB port
High efficiency constant circuit provides stable output up to 70 hours
2 user modes available (DEMO Mode and DAILY Mode)
Dual side switch design
5 brightness levels available with direct access to TURBO
Intelligent mode memory functio
2 lockout modes available (Half Lockout Mode and Full Lockout Mode)
Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
Metal ring pull able to withstand up to 30 kilograms of weight
HA III hard-anodized finish
Impact resistant to 1 meter
Specifications
Size: 70.3mm×29.5mm×26.2mm (2.77″ ×1.16″ ×1.03″) (Including the clip)
Weight: 53.2g (1.88oz) (Including the clip)
Accessory
Key Clasp
Operating Instructions
Multifunctional OLED Display
TUP is equipped with a multifunctional OLED display. (Please remove the screen protector before the first use.) When the light is

Nitecore TUP Specifications

General

Product color	Black
Flashlight type	Hand flashlight
Housing material	-
Lamp type	LED
Luminous flux	1000 lm
Lamps quantity	1 lamp(s)
Luminous intensity	8130 cd
Light beam distance (max)	180 m
Shockproof	Yes
Waterproof	No
Shockproof up to	1 m
International Protection (IP) code	IP54
Charging source	USB
Battery capacity	1200 mAh
Battery life (max)	70 h

Weight and Dimensions

Depth	70.3 mm
Width	29.5 mm
Height	26.2 mm
Weight	53.2 g