Need help?Do you have a question about the niteo GEDST0363-21 and is the answer not in the manual?
General| Brand | niteo |
|---|---|
| Model | GEDST0363-21 |
| Category | Measuring Instruments |
| Language | English |
Identifies the MEAS button for measurement and power on/off.
Button to cycle through different measurement modes.
Button for accessing stored measurements and changing units.
Button to reset measurements or turn off the device.
The physical tape measure component.
Mechanism to retract the measuring tape.
Clip for attaching the device to clothing or a belt.
Lanyard or strap for holding the device.
Cover for accessing the battery compartment.
Screen showing measurements and settings.
The laser emitter for distance measurement.
Instructions for powering the laser rangefinder on and off.
Steps for changing or installing batteries in the device.
Details on the functionality of each button on the device.
Explains how to use the MEAS button for laser activation and measurement.
Describes how to select different measurement modes using the button.
Details the functions of the UNIT button for memory access and unit selection.
Explains the CLEAR button's function for resetting and powering off.
Guides on how to use various measurement modes.
How to measure length, height, distance, and slope.
Using the device to add or subtract measured lengths.
Calculating the area of a structure by measuring length and width.
Calculating the volume of a structure using length, width, and height.
Calculating triangle sides using two measurements.
Displaying highest and lowest measurement values.
Setting whether to measure from the device front or back.
Switching between single laser spot and cross laser modes.
How to view, navigate, and clear stored measurements.
Instructions for using the integrated tape measure feature.
Details the warranty coverage, exclusions, and procedures.
To Next Page