Operation Guide
Start the Scooter
Press the Unlock button on the remote control. After the Turn Signal Indicators flash
twice, the scooter is unlocked. Insert the key into the Keyhole and turn to . Hold the
brake lever in and press and hold the Start Button for 2 seconds. The dashboard will
indicate . You are ready to go.
Locking the scooter
T
urn the key to
to turn off the scooter. Turn the steering handlebar to the left, then
push the key inward and turn to LOCK to lock Steering Handlebar. Press the Lock Button
on the Remote Controller within an effective distance to turn on the Alarm. The Turn
Signal Indicators will stay on for 2 seconds after the scooter is properly locked and armed.
Locating
Press the Locate Button and the Turn Signal Indicators will flash for 10 seconds. If no
further operations occur during this period, the Alarm will stay on for 10 seconds. The
Alarm can be cancelled by pressing the Unlock or Lock Button.
17
To Next Page
Loading...
