Nivona CAFEROMATICA 710 - 3.3 Making One Cup of Coffee

12
➔ Set the desired coffee strength
and water quantity.
➔ Press the 1-cup button (fig.
1/G).
➔ The machine now starts the
grinding and brewing operation.
The brewing operation can be
stopped at any point by pressing
either the 1-cup (fig. 1/G) or
2-cup button (fig. 1/H).
Caution: The first time you brew a
coffee, the grinding chamber is
still empty. The symbol for ‘add
beans’ (Symbol 12, 3 beans)
begins to flash and no coffee is
produced. If this occurs, simply
press the 1-cup button (fig. 1/G
and 6) again and the operation is
repeated.
Tip: To determine the ideal quant -
ity of water for your taste or cup
size, make your first cup of coffee
as follows:
➔ Turn the water quantity control
knob (fig. 1/D and 6) to one of the
following positions:
· To the middle of the dot scale
for an espresso cup.
· To the far right for a large cup.
➔ Press the 1-cup button (fig.
1/G).
➔ The machine starts brewing.
➔ Shortly before the desired
amount of coffee is reached, turn
the water quantity control knob
(fig. 1/D and 6) slowly to the left
until the machine stops brewing.
➔ For future use, note where on
the dot scale the water quantity
control knob (fig. 1/D and 6) is
now pointing.
3.4 Brewing two cups
In the 2-cup operation, two grind -
ings of coffee are done conse -
cutively.
➔ Place both (pre-heated) cups
under the coffee spout (fig. 1/J
and 5).
➔ Select the desired coffee
strength and water quantity sett -
ings for one cup (with the buttons
see fig. 1/D and 1/E).
➔ Press the 2-cup button (fig.
1/H).
➔ The machine now starts the
grinding and brewing operation
and produces two consecutive
cups of coffee.
... 3. Making coffee