GET TO KNOW MFLEX
As an added feature, you are able to adjust the width depending on your body type.
For small to average frames, keep the MFLEX in the shortest or closed position. For
larger frames, set the width to the open or wider position. Customize exactly where
you want the MFLEX to hit and you will maximize results.
A. Starting at the closed position, you have the option to widen 1 slot at a time. Each
slot measures 3/8" (9.52 mm) for a total of 6 slots. In the closed position, the top
middle of the heads measure 5-1/4" (133.35 mm) apart. At their widest, the top
middle of the heads measure 7-3/8" (187.32 mm) apart.
B. To adjust the width, you will find two buttons on the bottom of each side. Push the
left button in to slide the left side back and forth 3 slots. Push the right button in
the slide the right side back and forth 3 slots.
C. Replacing the heads is very simple. Locate the two buttons on top of each side.
Simply push the buttons in and slide the heads out. Push the buttons in again to
slide the heads back in.
10
To Next Page
Loading...