Noblelift RT20P User Manual (English)

Questions and Answers:

C
Christopher MunozAug 7, 2025
Why is my Noblelift RT20P Trucks failing to lift loads?
- T
  Tom CummingsAug 7, 2025
  If your Noblelift Trucks fail to lift loads, several factors could be at play. First, ensure that you are not exceeding the maximum load capacity specified on the ID plate. If the weight is within the limit, check if the battery is discharged and charge it if necessary. Also, inspect the lifting fuse and replace it if it's faulty. Low hydraulic oil levels can also cause this issue, so check and refill if needed. Finally, examine the hoses and cylinder for any oil leakage and repair them accordingly.
A
Angela WilsonAug 12, 2025
Why Noblelift RT20P only travels very slowly?
- A
  Ashley GutierrezAug 12, 2025
  If your Noblelift Trucks are moving very slowly, several factors could be responsible. Start by checking the battery status using the discharge indicator, as a discharged battery can cause this. Also, verify that the electromagnetic brake is not engaged. Inspect the tiller cables and connections for any damage or disconnection. Overheating of the electric system can also lead to slow movement, so stop using the truck to allow it to cool down. Lastly, check the heat sensor and replace it if necessary.
N
Natalie AdamsAug 17, 2025
Why Noblelift RT20P starts up suddenly?
- S
  Stephen RodriguezAug 18, 2025
  If your Noblelift Trucks start up suddenly, it could be due to a damaged controller, in which case you should replace it. Alternatively, the accelerator might not be returning to its neutral position. In this case, repair or replace the accelerator.