Need help?Do you have a question about the NOCO Genius GEN1 and is the answer not in the manual?
General| Type | Battery Charger |
|---|---|
| Input Voltage | 100-240V AC |
| Input Frequency | 50/60Hz |
| Output Current | 1A |
| Output Power | 12W |
| Output Voltage | 12V |
| Battery Types Supported | Lead-acid |
| Safety Features | Overcharge protection, short-circuit protection, reverse polarity protection, overheat protection |
Crucial DANGER and WARNING instructions for electrical shock, explosion, fire, and eye hazards.
Safety guidelines for working near lead-acid batteries, including protective gear and tool usage.
Essential steps and checks to perform before connecting the battery charger to the battery.
Guidelines for locating and securely mounting the battery charger for safe operation.
Details on compatible battery types, chemistries, and capacity range for the GEN Series chargers.
Step-by-step guide on connecting the charger to the battery and initiating the charging process.
Explanation of the status indicators (Red/Green/Flashing LEDs) during charging and error conditions.
Highlights key features like Waterproof, Fully Interactive, Rapid Charging, and Multiple Battery Compatibility.
Detailed description of the 8-step charging cycle and estimated charging times based on battery size.
Instructions for cleaning the charger and information on required maintenance.
Diagnosing and resolving issues indicated by flashing charge LEDs (e.g., voltage incompatibility, bad battery).
Steps to take when the battery charger shows no lights upon being plugged into an outlet.
How to address and resolve errors related to batteries with critically low voltage.
Procedure to verify if the battery charger is actively charging the battery.
Information on the limited warranty period, what is covered, and common warranty exclusions.
Explanation of fees associated with warranty service based on receipt status and time.
Instructions and importance of registering the product online to validate the limited warranty.
To Next Page