1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You
can use your device while it is
charging.
3. When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
Antenna
Your device may have internal and external
antennas. As with any radio transmitting
device, avoid touching the antenna area
unnecessarily while the antenna is
transmitting or receiving. Contact with such
an antenna affects the communication
quality and may cause the device to operate at a higher
power level than otherwise needed and may reduce the
battery life.
The figure shows the antenna area marked in grey.
Get started
16
Cyan
To Next Page
Loading...
