SPS-2 Soldering paste
spreader
Note: Existing solder paste stencils and component holder
jigs will be supported until January 2009. For all new parts
needing solder paste support after January 1, 2009, please
contact your solder machine manufacturer for the universal
solutions for solder paste application for rework purposes.
SRT-6 Opening tool
SRT-6 is used to open phone covers.
Note: The SRT-6 is included in the Nokia Standard Toolkit.
SS-108 Peeling tool
The peeling tool SS-108 is used to peel off the shielding.
SS-203 Domesheet
alignment jig
SS-203 is used for aligning domesheet to PWB.
SS-46 Interface adapter
SS-46 acts as an interface adapter between the flash adapter and
FPS-10.
RM-561
Service Devices and Service Concepts
Page 2 –10 COMPANY CONFIDENTIAL Issue 1
Copyright © 2009 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
