Nokia 2710 Navigation Edition
RM-586
Service Manual Level 1&2
 
12 
Confidential
Copyright © 2010 NOKIA 
All rights reserved
Version 1.0
ISSUE 1
 
9. DISASSEMBLY INSTRUCTIONS 
1) Nokia 2710 Navigation Edition disassembly.  2) You must use the Nokia Standard Toolkit version 
2. You will also need the SS-34 connector removal 
tool. 
3) Release the BATTERY COVER by sliding it in the 
direction shown. Remove the BATTERY COVER. If 
there is a battery inserted, remove it also. 
4) Unscrew the two TORX+ size 4 screws in the order 
shown. 
5) Start detaching the A-COVER by inserting the SRT-
6 between the A-COVER and D-COVER. Slide the SRT-6 
to shown direction and release the first two clips. 
6) Release the two clips on the other side of the 
phone by sliding the SRT-6 to direction shown. 
Continue to the top side of the phone and release 
the shown clip.