Menu functions
39
English
Tone settings
You can change the settings of the 
selected active profile.
Press Menu, and select Settings and 
Tone settings. Select and change 
Incoming call alert, Ringing tone, 
Ringing volume, Vibrating alert, 
Message alert tone, Instant 
message alert tone, Keypad tones 
and Warning tones. You can find the 
same settings in the Profiles menu, 
see Profiles on page 38.
Select Alert for to set the phone to 
ring only upon calls from phone 
numbers that belong to a selected 
caller group. Scroll to the caller 
group you want to select or choose 
All calls and press Mark.
Light settings
Lets you select if different light 
sequences follow the phone 
functions. Press Menu, and select 
Settings, Light settings and Light 
sequences to set the light effects on 
or off.
Personal shortcuts
With personal shortcuts you get 
quick access to frequently used 
phone functions. 
Right selection key
Press Menu, and select Settings, 
Personal shortcuts and Right 
selection key to allocate one phone 
function from a predefined list to 
the right selection key. Refer also to 
Standby mode on page 6. This menu 
is not shown in some operator 
variants.
Go to options
You can allocate phone functions 
from a predefined list to the left 
selection key.
Press Menu, and select Settings and 
Personal shortcuts. Select Select 
'Go to' options to choose the 
functions that you want to appear in 
the shortcut list. Select Organise 'Go 
to' options to rearrange the 
functions on your personal shortcut 
list. Refer also to Standby mode on 
page 6.
Voice commands
You can have phone functions which 
can be activated by saying a voice 
tag. Up to five functions can be 
selected for voice tag.
Press Menu, and select Settings, 
Personal shortcuts and Voice 
commands. Select the function 
folder that you want, scroll to the 
function to which you want to add a 
voice tag and press Add. A voice tag 
is indicated with  .
To add a voice command, refer to the 
instructions in section Adding and 
managing voice tags on page 37. To 
activate a voice command, refer to 
the instructions in section Making a 
call by using a voice tag on page 38.
9232486_3220_2_en.fm  Page 39  Thursday, January 20, 2005  1:31 PM