1—With the back of the phone facing you, press the indentations
on both sides of the lower shell. Slide the bottom of the shell off to
remove it.
2—To remove the top shell, slide it upwards.
3—To remove the key mat from the lower shell, push it down, and
pull it out of the shell.
4—To replace the key mat, slide it into the lower shell, and press it
into place.
5—Slide the upper shell onto the phone.
6—Slide the lower shell onto the phone until it clicks into place,
meeting the upper shell.
Getting started
18
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
