1. Select
Push to talk
→
Group list
→
Options
→
Send invitationVia
text message
.
2. Enter the phone number of each new member, or use the
Contacts list
.
Responding to an invitation
When you receive a text message invitation to a group,
Group
invitation received:
is displayed in your
Inbox
.
1. To see the nickname of the person who sent the invitation and
the group address, select View.
2. To add the group to your phone, select
Add group
; to reject the
invitation, select
{getDisplayText() failed}
]qtn.poc.quest.discard.
invite] Discard invitation.
3. To choose the status of a group after saving, select
Default
,
Listened
, or
Inactive
.
Talking to a group
To talk to the Default group after connecting to the push to talk
service, press the
Push to talk
key. You will hear a tone indicating
that access is granted, and the menu displays your nickname.
Continue to press and hold
Push to talk
the entire time you are
talking. When you have finished, release the key.
To try to respond to a group while another member is talking, press
the
Push to talk
key. You will hear a tone and
Queuing
is displayed.
Release the key and wait for the other person to finish. Press
Push to
talk
again when the speaker has finished.
Talking in a group is allowed on a first-come-first-served basis. When
someone stops talking, the first person to press
Push to talk
talks
next.
Remember to hold the phone in front of you during a
Push to talk
call so you can see the display. Speak toward the microphone, and do
not cover the loudspeaker with your hands.
Push to talk
85
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
