Nokia 5200 User Guide

Call functions
20
3. Call functions
■ Make a call
1. Enter the phone number, including the area code.
For international calls, press
*
twice for the international prefix (the +
character replaces the international access code), enter the country code,
the area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press + and to decrease, press - .
3. To end the call or to cancel the call attempt, press the end key, or close the phone.
To search for a name or phone number that you have saved in Contacts,
see "Search for a contact," p. 37. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch-dialing keys, 2 to 9. See "1-touch
dials," p. 39. Call the number in either of the following ways:
• Press a 1-touch-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch-dialing key until
the call begins. See 1-touch dialing in "Call," p. 48.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the phone. Voice commands are language-dependent. To set the language,
see Voice playback language in "Phone," p. 48.
Note: Using voice tags may be difficult in a noisy environment
or during an emergency, so you should not rely solely upon voice
dialing in all circumstances.
1. In the standby mode, press and hold the right selection key, or press and hold
the volume down key. A short tone is played, and Speak now is displayed.

Nokia 5200 Specifications

General

Brand	Nokia
Model	5200
Category	Cell Phone
Language	English