Nokia 6288 - Call Functions; Make a Voice Call

Call functions
21 Copyright © 2007 Nokia. All rights reserved.
3. Call functions
■ Make a voice call
1. Enter the phone number, including
the area code.
For international calls, press * twice
for the international prefix (the +
character replaces the international
access code), enter the country code,
the area code without the leading 0,
if necessary, and the phone number.
2. To call the number, press the call key.
3. To end the call, or to cancel the call
attempt, press the end key.
To end the call by closing the slide,
see Slide call handling in “Call,” p. 58.
To search for a name or phone number
that you have saved in Contacts, see
“Search for a contact,” p. 44. Press the
call key to call the number.
To access the list of phone numbers you
have most recently called or attempted
to call, in the standby mode, press the
call key once. To call the number, scroll to
the number or name you want, and press
the call key.
Speed dialing
Assign a phone number to one of the
speed-dialing keys, 3 to 9. See “Speed
dials,” p. 48. Call the number in either of
the following ways:
• Press the speed-dialing key, then the
call key.
•If Speed dialling is set to On, press
and hold a speed-dialing key until the
call begins. See “Call,” p. 58.
Enhanced voice dialing
To make a phone call, select and hold
right selection key and say the name of
the contact you wish to call. The phone
will automatically associate a virtual
voice tag with each contact in the phone
memory.
Make a voice dialing call
If an application is sending or receiving
data using a packet data connection, end
the application before you use voice
dialing in GSM. In WCDMA it is possible
to send voice and data simultaneously.
Voice commands are language-
dependent. To set the language, see Voice
playback language in “Phone,” p. 59.