Nokia 6288 - Call

Settings
Copyright © 2007 Nokia. All rights reserved. 58
for the synchronization, and start the
synchronization from the PC.
Synchronize from a server
To use a remote Internet server, you must
subscribe to a synchronization service.
For more information and the settings
required for this service, contact your
service provider. You may receive the
settings as a configuration message. See
“Configuration settings service,” p. 9 and
“Configuration,” p. 60.
If you have saved data on the remote
Internet server, to synchronize your
phone, start the synchronization from
your phone.
Select Menu > Settings > Connectivity >
Data transfer > Server synchronisation.
Depending on the settings, select
Initialising synchronisation or Initialising
copy.
If the contacts or calendar are full,
synchronizing for the first time or after
an interrupted synchronization may take
up to 30 minutes to complete.
USB data cable
You can use the USB data cable to
transfer data between the memory card
inserted in the phone and a compatible
PC or a printer supporting PictBridge. You
can also use the USB data cable with
Nokia PC Suite.
To activate the memory card for data
transfer or picture printing, connect the
USB data cable; when the phone displays
USB data cable connected. Select mode.,
select OK and from the following modes:
Default mode — to use the phone to
interact with applications on a PC that
has Nokia PC Suite installed
Printing — to use the phone with a
PictBridge compatible printer
Data storage — to connect to a PC that
does not have Nokia software and use
the phone as a data storage device
To change the USB mode, select Menu >
Settings > Connectivity > USB data
cable > Default mode, Printing, or Data
storage.
■ Call
Select Menu > Settings > Call and from
the following options:
Call divert — to divert your incoming calls
(network service). You may not be able to
divert your calls if some call barring
functions are active. See Call barring
service in “Security,” p. 61.
Automatic redial > On — to make a
maximum of 10 attempts to connect the
call after an unsuccessful call attempt
Speed dialling > On — to dial the names
and phone numbers assigned to the
speed-dialing keys 3 to 9, press and hold
the corresponding number key