Nokia 6288 - Display; Tones

Settings
51 Copyright © 2007 Nokia. All rights reserved.
■ Tones
You can change the settings of the
selected active profile.
Select Menu > Settings > Tones >
Incoming call alert, Ringing tone, Ringing
volume, Vibrating alert, Push to talk
settings, Message alert tone, Instant msg.
alert tone, Keypad tones, or Warning
tones. You can find the same settings in
the Profiles menu.
To set the phone to ring only upon calls
from phone numbers that belong to a
selected caller group, select Alert for.
Scroll to the caller group you want or All
calls, and select Mark.
■ Display
With display settings you can personalize
your phone display view.
Standby mode
Enable or disable active standby
from idle
To enable the active standby mode, select
Menu > Settings > Display > Standby
mode settings > Active standby > My
active standby.
To disable the active standby mode,
select Menu > Settings > Display >
Standby mode settings > Active
standby > Off
Standby settings
Select Menu > Settings > Display >
Standby mode settings and from the
following options:
Active standby > My active standby — to
display the active standby. Select
Options and from the following options:
• Personalise — to change the content
on the display
• Organise — to reorganize the content
on the display
• Enabling active standby — to change
the key for accessing the navigation
mode. The same setting is also in the
My shortcuts menu. See “Enabling
active standby,” p. 53.
Wallpaper — to set your phone to display
an image or a slide as wallpaper when
the phone is in the standby mode. Select
Wallpapers > Image or Slide set. Select
an image or a slide from Gallery, and
Select. To download more graphics, select
Graphic downloads.
Slide animation — to set your phone to
display an animation when you open or
close the phone
Standby font colour — to select the color
for the texts on the display in the standby
mode
Navigation key icons — to set the scroll
key icons that are shown in the standby
mode
Operator logo — to set your phone to
display or hide the operator logo